DT-ETC Micro Dry Block Temperature Calibrator
Product Features
Small and light, strong and durable, only weighing about 3kg, convenient on-site measurement calibration.
Fast calibration, 15 minutes can be stable.
The thermowell is replaceable and supports a custom jack for a variety of sensors.
RS-232 communication interface.
Request a Quote
Or whatsapp +8618853850621
Description
Download
Introduction
DT-ETC Micro Dry Block Temperature Calibrators, is DEARTO handheld type temperature calibration furnace, small and portable equipment, durable, simple operation, high accuracy. It is especially suitable for the on-site calibration of thermal resistance/thermocouple/temperature switch with various diameters, and the calibration occasions where fast calibration is required and the sensor is not convenient to disassemble.
Technical Parameters
|
Model |
ETC-150G |
ETC-400G |
|
|
Temp.Range |
-10℃~150℃ |
50℃~400℃ |
|
|
Display resolution |
0.1℃ |
||
|
Standard thermal block insert aperture diameter |
φ4,φ6,φ7 |
φ4.5,φ6.5,φ8,φ10 |
|
|
Please indicate the insertion depth & outer diameter of the tested sensor when ordering (support customization) |
|||
|
Stability |
±0.1℃ |
||
|
Radial uniformity |
≤0.2℃ |
||
|
Axial uniformity |
≤0.5℃ from bottom up to 40mm |
||
|
Insertion depth |
150mm |
||
|
Thermowell size |
Φ12.5mm*120mm(L) |
Φ30mm*110mm(L) |
|
|
Overall dimensions(mm) |
230*180*125 |
220*160*100 |
|
|
Power |
230W |
350W |
|
|
Power supply |
AC 220V,50Hz ; 110V,60Hz |
||
Enter your inquiry details, We will reply you in 1 hours.
Send
