Thermocouple Calibration Furnace
Product Features
Furnace size: 40mm×300mm
Temperature range: 300 ℃ ~ 1200 ℃
Scope of application: S / R short thermocouple, short type inexpensive metal thermocouple verification/calibration
Remarks: The furnace size and temperature range of the DTL-300G short thermocouple verification furnace can be customized.
Request a Quote
Or whatsapp +8618853850621
Description
Download
Introduction
DTL-SeriesThermocouple calibration is a temperature field constant temperature equipment suitable for the calibration of various types of standard thermocouples, working precious metal thermocouples, and base metal thermocouples. This series of products has the advantages of good thermal insulation and anti-leakage. The technical indicators of its temperature field fully comply with the relevant national calibration regulations and standard technical requirements. At the same time, our company also provides customers with non-standard customized services.
Technical Parameters
◇ Furnace size: 40mm×300mm
◇ Temperature range: 300 ℃ ~ 1200 ℃
◇ Temperature field index: The temperature field center deviates from the geometric center ≤10mm, within 40mm ≤1.0 ℃. The temperature gradient within ± 20mm in the center of the temperature field≤0.4 ℃ / 10mm.
◇ According to the regulations: "JJF1184-2007 Thermocouple Calibration Furnace Temperature Field Test Technical Specifications". "JJG668-1997 Working (Pt-Rh 10-Pt, Pt-Rh 13-Pt) short thermocouple calibration regulations".
◇ Scope of application: S / R short thermocouple, short type inexpensive metal thermocouple verification/calibration.
Remarks: The furnace size and temperature range of the DTL-300G short thermocouple calibration furnace can be customized.
Note: furnace inner size, and temperature range can be customized with non-standard.
![](https://www.dearto.com/uploads/202302/1_1675751788_WNo_600d279.webp)
Products Description
DTL series thermocouple calibration furnace is a temperature field constant temperature equipment suitable for the calibration of various types of standard thermocouples, working precious metal thermocouples, and base metal thermocouples. This series of products has the advantages of good thermal insulation and anti-leakage. The technical indicators of its temperature field fully comply with the relevant national verification regulations and standard technical requirements. At the same time, our company also provides customers with non-standard customized services.
Product Parameters
![](https://www.dearto.com/uploads/202302/DTL-600G Low-cost metal thermocouple calibration furnace_1675752374_WNo_703d487.webp)
DTL-600G Low-cost metal thermocouple calibration furnace
1.Furnace inner size:40 mm ×600 mm
2.Temperature range: 300℃~1200℃
3.Thermal field distribution: within 30mm of the effective working area, the temperature difference between any two points is not more than 0.5℃, the radius is within 14mm, and the temperature difference between any two points of the same section is not more than 0.25℃.
![](https://www.dearto.com/uploads/202302/DTL-600BG Precious metal thermocouple calibration furnace_1675752413_WNo_880d648.webp)
DTL-600BG Precious metal thermocouple calibration furnace
1. Furnace inner size:40 mm ×600 mm
2.Temperature range: 300℃~1200℃
3.Thermal field distribution: The highest temperature point deviates from the geometric
center of the furnace:≤20mm, Temperature gradient:≤0.4℃/10 mm.
![](https://www.dearto.com/uploads/202302/DTL-600BG Precious metal thermocouple calibration furnace_1675752307_WNo_600d426.webp)
DTL-300G Short thermocouple calibration furnace
1. Furnace inner size:40 mm x 300 mm
2. Temperature range: 300℃~1200℃
3.The temperature field center deviates from the geometric center no more than 10mm, and the temperature difference within 40mm is less than 1℃;The temperature gradient within ±20mm of the center of the temperature field does not exceed 0.4℃/cm
DTL-T Thermocouple annealing furnace
1. Furnace inner size:φ40mmx1000mm
2. Scope of use: Thermocouple annealing
3.Temperature field index: one end of the temperature field is less than 100mm from the furnace mouth, and the uniformity of the temperature field of 400mm is less than±20°C
4.Dimensions:1010×305×365(mm)
![](https://www.dearto.com/uploads/202302/DTL-T Thermocouple annealing furnace_1675752279_WNo_768d436.webp)
Patent & Software copyright certificate
![](https://www.dearto.com/uploads/202302/Patent certificate of thermocouple calibration furnace_1675752636_WNo_700d990.webp)
Patent certificate of thermocouple calibration furnace
![](https://www.dearto.com/uploads/202302/Software copyright certificate of thermocouple calibration furnace_1675752673_WNo_521d700.webp)
Software copyright certificate of thermocouple calibration furnace
![Your Image 1](https://www.dearto.com/uploads/202309/01_1694681815_WNo_600d845.webp)
![Your Image 2](https://www.dearto.com/uploads/202309/02_1694681824_WNo_600d845.webp)
Enter your inquiry details, We will reply you in 1 hours.
Send