DT Pro Wireless temperature/humidity/pressure validation system can be widely used in equipment verification and environmental monitoring in pharmaceutical, food, biological, chemical and other industries. Compared with the traditional wired verification system, the probe can be conveniently and quickly arranged, and the detection point is physical constraints greatly improve verification efficiency.

Function

The system consists of a wireless recorder (temperature, humidity, pressure), a data reading workstation, and wireless verification software.

The temperature recorder can effectively store 16000 pieces of data, and the temperature measurement accuracy is 0.1 ℃, which fully meets the needs of equipment and process verification in food and drug production enterprises and the verification needs in the fields of bioengineering, medical and transportation. The recorder uses replaceable batteries, with large power, low power consumption and long battery life. Adopt high pressure and waterproof design, can be used continuously for a long time in high pressure and high humidity environment.

The data reading workstation is divided into a single-hole workstation and a 10-hole workstation. The universal USB serial port is used to connect to the computer, and data communication can be carried out conveniently, efficiently and safely.

The software realizes data collection, data analysis and report generation, meets FDA 21 CFR Part 11, and supports the electronic signature of documents. Support custom stages and verify each stage to generate a stage verification report.

Features

◇Switch between Chinese and English versions at will;

◇Comply with FDA 21CFRPart 11 regulations;

◇With data audit tracking function, with three levels of authority (freely assignable authority);

◇It has data statistical analysis functions, including large and small values, average value, span, temperature difference at the same time, F0 value test, etc., and can be freely selected according to needs.

Application Scenarios

The system can be applied to GMP pharmaceutical industry, GSP industry, biological industry, medical industry, food industry, transportation industry.

GMP

Steam sterilizer verification / water bath sterilizer verification, rubber plug washer verification / aluminum lid washer verification,

freeze dryer verification /cryogenic refrigerator verification,constant temperature and humidity chamber verification /

stability incubator verification

GSP

Cold storage verification / refrigerated truck verification, refrigerator / incubator verification, cool storage /

normal temperature storage verification

Biological

Stirred fermentation tank verification, culture tank verification, process development data

Technical Parameters

	Temperature Verifier		Temp. Humidity Verifier	Pressure Verifier
Model	TDLA-G	TDLB/TDLC-G（Bendable Probes）	MDLA-G	PDLA-G
Measuring range	-90~150℃ Extendable to 400˚C with insulated box	-50~150℃ Extendable to 400˚C with insulated box	-40~125℃ 0~100%RH	-40~140℃ 0~600kpa （absolute pressure）
Resolution	0.01℃	0.01℃	0.01℃/0.01%RH	0.008psi；0.55mBar
Accuracy	-50℃ below accuracy ±0.2°C -50-150°C Accuracy ±0.1°C	±0.1℃	±0.2℃ ±2%RH	±0.1%full scale
Transducers	PT100 Class 1/3 DIN	PT100Class 1/3 DIN	Temp：PT100 Humi.：capacitive	Strain type
Capacity （points recorded）	64,000	64,000	Each 32,000	64,000
Recording frequency	1S~18Hours	1S~18Hours	1S~18Hours	1S~18Hours
Battery Lifetime	36 months	36 months	36 months	36 months
Communication method	RS 485 contacts	RS 485contact	RS 485contact	RS 485contact
Housing construction	Food grade 316L all stainless steel	Food grade 316L all stainless steel	Food grade 316L all stainless steel	Food grade 316L all stainless steel
waterproof rating	IPX-8	IPX-8	IPX-8	IPX-8
Pressure resistance	-1~5Bar	-1~5Bar	-1~5Bar	-1~5Bar

Interface

Tai’an Dearto Qualification & Honor Certificate

Tai’an Dearto Qualification & Honor Certificate

Enter your inquiry details, We will reply you in 1 hours.

Send